Roof Access Systems (Fire Brigades)
by Admin
Posted on 14-04-2023 06:52 AM
Fire and rescue service personnel should only
work
at height when absolutely necessary. Where there is a risk of falling from height, the hierarchy 'avoid, prevent, minimise' should be used:
avoid work at height where it's reasonably practicable to do so
where work at height cannot be avoided, prevent falls by using an existing safe place of work, such as a non-fragile roof with a permanent edge protection
where risk cannot be eliminated, minimise the distance and consequences of a fall by using collective and personal protection
to reduce risk of injury or damage, personnel should always consider using alternative methods before committing to higher-risk options.
Working at Heights Hazard
Working at height training course is designed for all personnel who work at height. Course increases awareness of the hazards and risks involved in working at heights. This training is also designed for people who may be required to rescue a person from a height. Examples of work activities that are classified as working at height:
working on trestles
working on a flat roof
erecting false work or form work
working on a ladder.
Course no. Zt-molwah-8hr 1 day the province of ontario’s working at heights training program standard identifies the requirements that must be met to support consistent and quality training for workers in the province of ontario. Msa is accredited to offer a comprehensive, performance-based training program that meets or exceeds the core competency requirements for working at heights in ontario. This 1 day training course meets the requirements as directed by the april 1, 2015 training program and provider standards established by the chief prevention officer. Module 1: working at heights basic theory rights and responsibilities related to working at heights general hazard recognition.
Working at heights always involves the risk of a fall. But it’s not just the steelworker on a skyscraper handling a rivet gun 850 feet in the air who needs to be careful; a dangerous fall can occur even when completing routine tasks like going up a ladder to reach items up on a shelf. In fact, the most common height to fall from in the workplace is 6–10 feet, accounting for 25% of all fall-related deaths. Even a responsible employer who takes health and safety seriously and provides workers with the requisite equipment and training needs to stay vigilant in keeping workers aware of the hazard of falls when working at heights.
All ontario workers on a construction project who may use a method of fall protection to protect themselves from a fall hazard must receive approved working at heights (wah) training. However, an important part of wah training that is often overlooked is the requirement for the employer to provide site-specific wah training. This advisory contains helpful information on providing site-specific wah training to workers. 2 pages. Revised august 2020. Download now.
Want to get trained?
Excavations in relation to working at height fall arrest and fall restraint systems risk assessments for working at height suspension trauma and rescue plans learning outcomes: participants will be trained to work at heights safely. They will understand the legal requirements to carry out the work, how to select the correct equipment for their work and identify the dangers associated with the work. This course is designed for: a good understanding of both oral and written english. It is highly recommend candidates have or complete a qqi level 6 training qualification, especially if they intend delivering instruction or training. Training methodology: this course is classroom based, it is highly interactive with role-playing and practical exercises to reinforce understanding and learning.